Ceramic Coating

1000 wash protection ceramic coating

Description:

Protection & gloss enhancer with ongoing ceramic protect, The Ceramic coating is easy to apply using one of our pads, We supply a separate instruction guide to how to use this prodect

How to Use:

A high end ceramic coating that gives long last protection & high definition gloss. DIRECTIONS Step 1: Full decontamination wash of the vehicle to ensure a clean surface. If required use an iron remover to remove imbedded contaminants in the vehicle paintwork. Step 2: If required clay & polish the surface to ensure the vehicle is swirlmark & scratch free to give the best finish. Step 3: Remove any greases or polish residues using an isopropanol spray or panel wipe & allow the car paint to cool to ambient temperature. Step 4: Apply a small amount of coating to a foam pad. Shake the ceramic coating bottle and apply a small amount across the applicator. Apply the coating in a continuous pattern evenly spreading the product. For best results apply to one panel at a time e.g. Front wing, then door etc. Once applied wipe the residue from the panel (Do not allow the product to dry for more than 45 seconds to 1 minute) then buff with a secondary microfibre towel. Step 5: Once applied to the whole vehicle allow 24h to cure before use and 7 days before washing the coating to allow full cure of the coating icanvalet.com is the registered trade mark of iprotect, for all enquires please contact us.